Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Cisco Employee

CUCM SNMP Query

Hi,

I have some questions on CUCM SNMP query, seeking your help here.

1.       When I  run snmpwalk on a node of a CUCM cluster I am getting below output:

C:\Documents and Settings\ktyagi>snmpwalk -c public -v2c 10.253.55.53 .1.3.6.1.4.1.9.9.156.1.1.2.1.4

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.1 = STRING: "7.1.3.32900-4"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.2 = STRING: "7.1.3.32900-4"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.4 = STRING: "7.1.3.32900-4"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.5 = STRING: "7.1.3.32900-4"

C:\Documents and Settings\ktyagi>snmpwalk -c public -v2c 10.253.55.52 .1.3.6.1.4.1.9.9.156.1.1.2.1.3

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.3.1 = STRING: "lhrcm1001"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.3.2 = STRING: "10.253.55.53"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.3.4 = STRING: "10.135.243.54"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.3.5 = STRING: "10.135.243.53"

Now, here “Sub OID” has been assigned to each node, I wanted to know the logic on the basis of  which these nodes have been sequenced.

2.       When I run same query on a CUCM 6.1 cluster output presented is bit different, it gives value for the node on which query is running and rest as “UNKNOWN”.

C:\Documents and Settings\ktyagi> snmpwalk -c public -v2c 145.25.25.201  .1.3.6.1.4.1.9.9.156.1.1.2.1.4

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.1 = STRING: "UNKNOWN"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.2 = STRING: "UNKNOWN"

SNMPv2-SMI::enterprises.9.9.156.1.1.2.1.4.3 = STRING: "6.1.3.3190-1"

3.       Is there an OID to identify if a particular CUCM node is Publisher or Subscriber.

641
Views
0
Helpful
0
Replies
CreatePlease to create content