CUCM &Unity Connection ports

[adamgibs7]

Dear,

I have a unity connection setup in which publisher is in HO and the subscriber is in DR, i want to know the port list for communication between the unity connection pub and sub and in between unity and cucm,

As per the link below, i managed to get the port list for CUCM and IM& Presence  but there is no information for the ports between unity connection and CUCM.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91.html

Thanks

[Aman Soi · Accepted solution]

Hi,

you can refer the link for UCXN 9

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/9x/security/guide/9xcucsecx/9xcucsec010.html

regds,

aman

[adamgibs7]

Dear Aman

1 question,

subscriber usually takes the time from publisher,suppose when the publisher fails then, subscriber takes the time from where???

Thanks

[Aman Soi]

Hi,

I have never tested this but what I think that Subscriber would switch over to its local clock.

NTP is configurable only in PUB

redgs,

aman

[adamgibs7]

Dear Aman,

We set the country while installing we dont set any local time,???

Thanks