Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCM Upgradation from 8.6 to 9.1

Hi

when we upgrade cucm 8.6 to 9.1, can we use the same 9.1 iso file which we wre using for the full installation?

Thanks in Advance....

5 REPLIES
Purple

CUCM Upgradation from 8.6 to 9.1

Hi Joseph,

No, that is the patch u need to download from cisco site which does not have bootable.

iso used for full installation  has bootable.

regds,

aman

CUCM Upgradation from 8.6 to 9.1

Hi Midhun,

You need to use an upgrade file, not the bootable file that you use for fresh installation. You can either request it through the PUT tool or you can download it from the following link

http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074295&release=9.1%282%29SU1&relind=AVAILABLE&rellifecycle=&reltype=latest

HTH

Manish

Community Member

CUCM Upgradation from 8.6 to 9.1

Hi Manish

thank you for your reply

i already used this file (UCSInstall_UCOS_9.1.2.10000-28.sgn.iso)  but after starting the upgrade it stck there for 6 hrs.

Then i cancelled upgrade process.

CUCM Upgradation from 8.6 to 9.1

Hi Midhun,

Please ensure that you meet the hardware requirements for cucm version 9.1. If that is in place then please reboot the Publisher and attempt the upgrade again and provide the install logs if the upgrade fails.

HTH

Manish

Purple

CUCM Upgradation from 8.6 to 9.1

Hi Joseph,

How many servers and IP phones u have in cluster?

regds,

aman

168
Views
0
Helpful
5
Replies
CreatePlease to create content