Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM upgrade from 6.0(1) to 6.1(1)

Hi all, has anybody already try to upgrade from cucm 6.0(1) to 6.1(1).

The first node is not able to use 6.1(1) version indicating that there is no licence for this feature !!!! the second node is ok in 6.1(1).

Any suggestions ?

Thanks for your help.

Julien

2 REPLIES
Bronze

Re: CUCM upgrade from 6.0(1) to 6.1(1)

Did this ever get resolved?

I performed this upgrade last night on two nodes with no issue. I upgraded from 601a to 611a.

Thank you,

Jon Nelson

New Member

Re: CUCM upgrade from 6.0(1) to 6.1(1)

Hello Jon, after reloading the .lic file into the first node, service start correctly on it.

I also had to use "utils dbreplication reset" command becasue of synchronisation problem.

Regards

Julien.

104
Views
0
Helpful
2
Replies
CreatePlease to create content