cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
357
Views
0
Helpful
3
Replies

CUCM Upgrade from 6.0 to 6.1(3)

jheckart
Level 3
Level 3

Hi,

I am planning an upgrade from CUCM 6.0.1.2000-3 to 6.1.3.2000-1, and nowhere is the upgrade path from 6.0 listed in the release notes.

Do I need to upgrade to 6.1.2 first, then move to 6.1.3?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp396072

Thanks,

Jeff

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

View solution in original post

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

Thanks Rob.

At least it's a quick process :)

Hey Jeff,

You are most welcome my friend! Not like the "old" days, I remember a 30 hour ordeal going from CCM 3.2 to 3.3 UGHHH!!

Cheers!

Rob

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: