Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCM Upgrade from 6.0 to 6.1(3)

Hi,

I am planning an upgrade from CUCM 6.0.1.2000-3 to 6.1.3.2000-1, and nowhere is the upgrade path from 6.0 listed in the release notes.

Do I need to upgrade to 6.1.2 first, then move to 6.1.3?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_3/cucm-rel_note-613a.html#wp396072

Thanks,

Jeff

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

Re: CUCM Upgrade from 6.0 to 6.1(3)

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

3 REPLIES
Hall of Fame Super Red

Re: CUCM Upgrade from 6.0 to 6.1(3)

Hi Jeff,

This is most correct my friend :) This upgrade will be a two-step method (6.0 to 6.1(x) first). The upgrade paths are nicely shown in this excellent doc;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074

Hope this helps!

Rob

New Member

Re: CUCM Upgrade from 6.0 to 6.1(3)

Thanks Rob.

At least it's a quick process :)

Hall of Fame Super Red

Re: CUCM Upgrade from 6.0 to 6.1(3)

Hey Jeff,

You are most welcome my friend! Not like the "old" days, I remember a 30 hour ordeal going from CCM 3.2 to 3.3 UGHHH!!

Cheers!

Rob

163
Views
0
Helpful
3
Replies
CreatePlease to create content