cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1265
Views
0
Helpful
6
Replies

CUCM upgrade from 9.1.2.10000-28 Restricted to 9.1.2.11900-12 Unrestricted

Kudur MohanRaj
Level 1
Level 1

Hi,

I am trying to upgrade CUCM 9.1.2.10000-28 cluster to 9.1.2.11900-12 cluster. I have succeeded with 2 servers(Publisher & one Subscriber). Let me tell the total number of nodes in my cluster. It is a 4 node cluster, where I am planning to use 1 server as TFTP server. All others are involved for Call Processing. 

 

2 sites involved. Site A and Site B.

Site A has CUCM Publisher and 1 Subscriber which are already upgraded to 9.1.2.11900-12 Unrestricted version.

Site B has 2 Subscribers where one among them will be used as TFTP server and the other will be for Disaster recovery for Site A.

Site A to Site B Round trip delay is approx 80ms.

I have upgraded CUCM servers at Site A. But it is continuous failure at Site B.

 

I have uploaded the install log down below. Please help me resolve this issue asap.

 

Thanks  in advance,

MR

1 Accepted Solution

Accepted Solutions

Richard Simmons
Level 3
Level 3

Hi MR

From the log file you attached i can see the following;

06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  ontape backup file version [ccm9_1_2_10000_28] db version on local box[ccm9_1_2_11900_12]|<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  **********************************************************************************************************************|<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  ontape_backup pulled from the pub is of a different version than running on this subscriber |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  please reupgrade the pub, this will regenerate the correct backup of the version that subscriber is being upgraded to |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  Install is going to fail now |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  **********************************************************************************************************************|<LVL::Debug>

Verify the media is copying over correctly to the subscriber by checking the MD5 hash is correct, if it is correct then you will need to upgrade the Publisher again and then try upgrading this subscriber.

Regards,

Richard

 

View solution in original post

6 Replies 6

Richard Simmons
Level 3
Level 3

Hi MR

From the log file you attached i can see the following;

06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  ontape backup file version [ccm9_1_2_10000_28] db version on local box[ccm9_1_2_11900_12]|<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  **********************************************************************************************************************|<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  ontape_backup pulled from the pub is of a different version than running on this subscriber |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  please reupgrade the pub, this will regenerate the correct backup of the version that subscriber is being upgraded to |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  Install is going to fail now |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) |<LVL::Debug>
06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  **********************************************************************************************************************|<LVL::Debug>

Verify the media is copying over correctly to the subscriber by checking the MD5 hash is correct, if it is correct then you will need to upgrade the Publisher again and then try upgrading this subscriber.

Regards,

Richard

 

Hi,

 

from the logs, I could also find this error

Function: notification(), NTP time synchronization failed while trying to reach the primary node NTP server IMAC-PUB. Verify the network connectivity, delay and jitter to the primary node and that the primary node NTP server is operational.  Use CLI 'utils ntp status' to verify NTP server status.|<LVL::Error>

Can u check the connectivity?

 

regds,

aman

Hi Aman,

I have checked the NTP syncronization and is good. I have verified with "utils ntp status" on both my publisher and subscriber.

 

Thanks,

MR

Hi MR,

 

I am just guessing this bug , not sure.

 

SUB upgrade fails with FIPS enabled.
CSCud51156
 
Suggest opening TAC case.
 
regds,
aman

Sean Alexander
Level 1
Level 1

Have you switched version to on the upgraded PUB?

Considering you are having issues, have you considered just making a copy of your TFTP files on those subscribers, deleting the subscribers from the Pub and adding them back as 2 new subscribers?

Kudur MohanRaj
Level 1
Level 1

hi richardsimmons,

06/13/2014 14:57:37 component_install|(CAPTURE) Fri Jun 13 14:57:37 2014 dbllib.getDataFromPub  DEBUG:  please reupgrade the pub, this will regenerate the correct backup of the version that subscriber is being upgraded to |<LVL::Debug>

 

I re-upgraded the pub and installed my subscriber before making a restore of DRS, which made my day. Thank you richardsimmons.

 

Thank you all.

MR.