I have CUCM126.96.36.199771-4 and want to upgrade with the image downloaded from CCO (UCSInstall_UCOS_ES_188.8.131.5207-1.sgn.iso) but I have error message 'No valid upgrade options were found' when I click <Next> button on the upgrade screen.
No readme file available for 7.0.1. please guide me what's problem on me.
What you downloaded in simply a patch that goes on top of 7.0.1 system. You need to first take your system to 7.0.1, since 7.0.0 was never officially released I am not sure how you would get your system updated to the 7.0.1 version as you normally require upgrade media kit for these type of upgrades.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...