We have a medium office we just acquired, with an unsupported v6.1 CUCM environment. 300 phones. No UCSS or contracts of any type. We're getting proposals on a new BE6K system.
I know there's no direct upgrade path from 6 to 10. But would a multi-step upgrade be recommended, or should we just start fresh? We've had two Cisco partners respond to our RFI, each with different opinions. Wanted to see what the community thought.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...