i want to ask question about the upgrade of unified communications manager from 4.1.3 to 7.x....I want to ask that when we use data migration assistant tool on CCM4.1.3 (for the generation for upgrade file) whether the IP telephony setup will be running ( i.e ip phones will be working) and perform call processing at the same time generating the file for migration or not.
Your phones will continue to work while running DMA. However, it is (as stated by others) recommended to run this after hours. This is because it can (and sometimes does) spike the CPU on the server. Also, the installation of DMA requires that you reboot the Publisher before setup is complete and you run DMA.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...