Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

CUCM v8.6.2 Database Communication Error

I have CUCM version 8.6.2.20000-2 running on VMware ESXi v5.0.0, and when it was restarted there was the error Database Communication error, there was no IP Address or hostname change, "A Cisco DB" service is not running:

admin:utils service list

A Cisco DB[STOPPED]  Component is not running

... and cannot be started:

admin:utils service start A Cisco DB

Service Manager is running

A Cisco DB[STARTING]

A Cisco DB[STARTING]

A Cisco DB[STARTING]

Component is not running

A Cisco DB[NOTRUNNING]

What can I do on this situation??  Any ideas that could help me??

It's a single node, this is the server information for CUCM server:

VMware ESXi v5.0.0

2 vCPU: Intel(R) Xeon(R) CPU E5506 @2.13GHz

Disk 1: 500GB

12288 Mbytes RAM

Regards,

Juan Carlos Arias

  • IP Telephony
Everyone's tags (3)
8 REPLIES
New Member

CUCM v8.6.2 Database Communication Error

utils service stop A Cisco DB •

utils service start A Cisco DB •

Stop the CEF service from serviceability page • utils service stop A Cisco DB •
utils service start A Cisco DB •
Stop the CEF service from serviceability page •

CUCM v8.6.2 Database Communication Error

Qiyu, I can't initiate any GUI service, I'll try it with OS Administration and post the results.

Thanks for your comments.

New Member

CUCM v8.6.2 Database Communication Error

CUCM v8.6.2 Database Communication Error

Can't troubleshoot cause DB is not running, and it's not started:

admin:utils dbreplication runtimestate

Database is down: please restart the database before reattempting a status check

admin:utils service start A Cisco DB

Service Manager is running

A Cisco DB[STARTING]

A Cisco DB[STARTING]

A Cisco DB[STARTING]

Component is not running

A Cisco DB[NOTRUNNING]

I appreciate all the ideas that could help for a solution.

Thanks,

CUCM v8.6.2 Database Communication Error

Do you have a backup? You can make a fress install as last resource...

Please remember to rate useful posts clicking on the stars below. Favor calificar todos las respuestas útiles dando click en las estrellas de mas abajo. ___________________________________________ LinkedIn Profile: do.linkedin.com/in/leosalcie
New Member

Hi Juan,Please, i have a

Hi Juan,

Please, i have a similar problem of Cisco DB not running, am sure you would have eventually solved the problem. Please share with me how you did it. Thanks

 

Ope

Hi opeyemityusuf,

Hi opeyemityusuf,

 first of all, use the following command to check your problem:

 

show perf query class "Number of Replicates Created and State of Replication"

 

Regards.

 

New Member

Thanks,Once i get this done,

Thanks,

Once i get this done, i will send the details.

 

Regards

3542
Views
0
Helpful
8
Replies