there are CUCM with Unity connection in one side, and CME in other side.they are communcating by SIP trunk. I like to have reach users in CME, when caller hits to directory handler in Unity Connection. I've created contacts in Unity Connection with the same extension as user's in CME. But it seems it doesn't work. when I reach to directory handler in Unity Connection and dial the first name of contact, it doesn't recognize it.
You need to create voice mailbox for each user in order to use directory handlers. Here's a brief detail about how directory handler works:
Directory handlers provide directory assistance that callers can use to reach Cisco Unity Connection users with VOICE MAILBOX. When a caller searches for a user name or part of a name, a directory handler looks up the mailbox extension and routes the call to the appropriate user.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...