Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCM with two PRI

Hi All,

we have a customer with 3COM phone system connected by PRI. they like go with CUCM and integration with 3COM. this is our propose:

have 2821 voice gateway with two T1 PRI port. connect one PRI from telco to gateway, and connect second T1 port to 3COM. if there is any useful link or documentation related to this scenario, I would be appreciated so much.

thanks

Alex

3 REPLIES
Hall of Fame Super Gold

Re: CUCM with two PRI

Yes, recommend you use H.323 or sip, just configure the correct destination-patterns in dial-peer. This depends on your specific country and dial-plan.

New Member

Re: CUCM with two PRI

thanks for the reply,

3COM is not IP PBX, it is old by it supports PRI.

thanks

Alex

Hall of Fame Super Gold

Re: CUCM with two PRI

Yes, that is what I meant.

Please remember to rate useful posts with the scrollbox below.

133
Views
0
Helpful
3
Replies
CreatePlease to create content