Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

cucm5 + mgcp gateway 2821 with fxo ports

how can I add a name or tag for inbound call via the fxo port, so that I know where the call comes from. As I recall, fxo port on mgcp gateway doesn't support caller id. Actually, incoming calls might not send caller id to the gateway neither.

Thanks.

1 REPLY
Community Member

Re: cucm5 + mgcp gateway 2821 with fxo ports

My understanding is that you cannot add a "tag" using a MGCP gateway. However, if you switch to H.323, you can set the "station-id name" on the voice-port.

The FXO port on the MGCP gateway should send caller ID to UC Manager, it just won't send caller name. H.323 will support both.

125
Views
0
Helpful
1
Replies
CreatePlease to create content