Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cucm6, blank translation to a CTI RP

[IP Phone line, dn 11150] --> translated to 11143 --> [IPCC application]

When line with dn 11150 is pressed, the call to 11143 doesn't go thru.

For detail, see the attached spreadsheet.

DNA analyzer says:

Calling Party Information

Calling Party = 11150

Partition = PAR_FV_Phones

Device CSS =

Line CSS = CSS_FV_intercom_translation

AAR Group Name =

AAR CSS =

Dialed Digits = 11143

Match Result = BlockThisPattern

But if I change the Called Party to an IP Phone DN, the call will go thru.

2 REPLIES
Cisco Employee

Re: cucm6, blank translation to a CTI RP

does the translation pattern CSS reaches that number??

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: cucm6, blank translation to a CTI RP

for sure. please refer to the attached spreadsheet.

Thanks.

Jon

112
Views
0
Helpful
2
Replies