I'd like to change the extension length from 3 to 4, however the CUCMBE 3K's GUI interface doesn't allow me to do that. I have consulted the administrator guide but it didn't even tell me how to change it.
As per the administrator guide:
"Select the value of the extension from the drop-down list. The values are from 3 to 11. The length of Main Number cannot be less than the value selected here.
You cannot update this field in the Cisco Business Edition 3000 Administrative Interface."
Does anyone know how to change extension length?
Please rate replies and mark question as "answered" if applicable.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...