CUCMBE 6.1.2 - Extension mobility not working - Non defined IMS exception
I've installed a CUCMBE 6.1.2. I've configured Extension Mobility, but when I try to login I get the following error: "<error code="2">Application Authentication Error: Could not execute user authentication: Coudn't authenticate: Non Defined IMS Exception"
If I logon with a wrong PIN code, I get the normal authentication failure.
What is causing this error and how can I solve it?
At the beginning I had issues logging into the CM Administration (typo in the password...) so I had to reset it using the CLI-command to reset your UI password. Could this cause the issue?
Re: CUCMBE 6.1.2 - Extension mobility not working - Non defined
The error seems to be related to authentication process.Try Changing the password of CCMSysUser and restart the Tomcat service which may solve the problem.The same steps have solved similar issues in the past.The Cisco Extension Mobility feature allows users to temporarily access their Cisco Unified IP Phone configuration such as line appearances, services, and speed dials from other Cisco Unified IP Phones.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...