You can certainly add speed-dials through the BAT XLT Phones template, or specifically on the device template. There are two aspects to be aware of:-
First, you will have to associate the speed-dials with the device template when the phone is first imported. It is not possible to update them after the phone is added.
Second, you will have to added the speed-dials to each different device template type.
So if you are only importing 7941s for example then you will only need to add them to the one template. If you have different device types, including UDPs then you will have duplicate them across these also.
The simplest option is to create individual device templates, and create your speed-dials within the Phones XLT spreadsheet.
According to the CUCMBE BAT guide these are the device that can be added:-
You can use BAT to work with the following types of devices and records:
â¢Add, update, and delete Cisco Unified IP Phones including voice gateway (VGC) phones, computer telephony interface (CTI) ports, and H.323 clients
â¢Add, update, and delete users
â¢Add, update, and delete User Device Profiles
â¢Add, update, and delete Cisco Unified Communications Manager Assistant managers and assistants
â¢Add, update, and delete ports on a Cisco Catalyst 6000 FXS Analog Interface Module
â¢Add or delete Cisco VG200 and Cisco VG224 analog gateways and ports
â¢Add or delete Forced Authorization Codes
â¢Add or delete Client Matter Codes
â¢Add or delete Call Pickup Groups
â¢Update or export CUP/CUPC users
â¢Populate or depopulate the Region Matrix
â¢Insert, delete, or export the Access List
â¢Export or import configuration
â¢Insert, delete, or export Remote Destination and Remote Destination Profile
You can use the Import/Export menu in Cisco Unified Communications Manager Bulk Administration Tool (BAT) to export or import parts of the Cisco Unified Communications Manager database to another server, or to the same server with modifications. This reduces the configuration time that is required by importing a preconfigured database to the installed Cisco Unified Communications Manager server.
These are the options that can be exported, including Translations, taken from this doc:-
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.