If you are installing a new CUCMBE 6.x and the existing customer does not have a DNS, do you tell the customer to build his own DNS to be use by CUCMBE or CUCMBE has an internal DNS that automatically runs by default? The phones I connected are having a DNS timeout.
Having DNS in UC environment is strongly suggested, but the phones don't really need DNS for anything, unless you need it for access to some xml services, etc. You can always create seperate DNS environment and put UC components in it, but the question is do you need it.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...