cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
3
Helpful
6
Replies

CUCMBE 6000 LIC

sheraz butt
Level 1
Level 1

Hi Support,

I have installed CUCM/CUC 6000 (UCS C200 M2) Exsi.4.1.0  i use ova taplates for both now i need to install the .lic which MAC should i chose i didnt understand do i have to configure manually this is the network output for CUCM what if i reinstall these MAC will remain same???

DHCPdisabled
StatusUp
IP Address10.10.5.5
IP Mask255.255.255.000
Link Detectedyes
Queue Length1000
MTU1500
MAC Address00:0c:29:5c:f8:7e
License MAC6a3cacbd1a51
RX Bytes356175
RX Packets2637
RX Errors0
RX Dropped0
RX Overrun0
RX Multicast0
TX Bytes2445227
TX Packets1088
TX Errors0
TX Dropped0
TX Carrier0
TX Collisoins

0

=========================================================================================

For Unity Connection

DHCPdisabled
StatusUp
IP Address10.10.5.6
IP Mask255.255.255.000
Link Detectedyes
Queue Length1000
MTU1500
MAC Address00:0c:29:9c:04:07
License MAC0a849e42d4e7
RX Bytes277824
RX Packets2636
RX Errors0
RX Dropped0
RX Overrun0
RX Multicast0
TX Bytes1594214
TX Packets878
TX Errors0
TX Dropped0
TX Carrier0
TX Collisoins0

Regards

Sheraz

3 Accepted Solutions

Accepted Solutions

Then you use the respective license MAC to license each system

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Use the License MAC 6a3cacbd1a51 for all licensing with this version, once you go to version 9+ it becomes irrelevant due to ELM implementation.

HTH,

Chris

View solution in original post

1. See this thread:

https://supportforums.cisco.com/thread/2177324

2. this is OVA for provisioning manager, if you want to install and use it this the OVA template for it.

HTH, please rate all useful posts!

Chris

View solution in original post

6 Replies 6

Jaime Valencia
Cisco Employee
Cisco Employee

What versions are you using???

It all depends upon that fact, and you're not mentioning it.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hi Sir,

Thanks for  quick reply we  ordered all the lic for 6K CUCM/CUC are installed up and running EXSi version 4.1 vSphare 4.1 registered version (UCS C200 M2 rack mount server )

CUCM 8.6.2a

CUC    8.6.2a

Regards ,

Sheraz

Then you use the respective license MAC to license each system

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Use the License MAC 6a3cacbd1a51 for all licensing with this version, once you go to version 9+ it becomes irrelevant due to ELM implementation.

HTH,

Chris

Hello Sir ,

First of all thanks you very much for help okay i will use CUCM  License MAC for CUCM and Unity License MAC for CUC.

I have only 2 questions now your help will be appreciated.

1) If something happend or crash software and i need to reinstall the CUCM and CUC on same server from scratch the LIC MAC will change or remain same for both product CUCM/CUC 8.6.2a or i can backup and restore? .

2) what is this file for (cupm_8_6_linux_vmware.ova) i received with the bundle  i need to install this or its okay to contnue because i install this and its asking for username and password.

Please correct me.

Thanks In Advance

Sheraz

1. See this thread:

https://supportforums.cisco.com/thread/2177324

2. this is OVA for provisioning manager, if you want to install and use it this the OVA template for it.

HTH, please rate all useful posts!

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: