CUCMBE 7.x - Adding Device Packs and User/Phone Add
Guys have a client with CUCMBE 7.x and some recentley added 7945 Handsets.
I have installed the 7945 device pack as per usual and it works fine, however when I try to add a user through User Management > User/Phone Add the 7945 Phone isn't available under the Product Type drop down box.
Is there anyway to add installed devices through the User/Phone Add Method?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...