Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUCME in SRST v8.1 Port 2000 Phone Not Register on VG

We have CUCM 7.1

We have 2821 Router at remote site running 151-2.T1

The basic config...

telephony-service

srst mode auto-provision none

srst dn line-mode dual

ip source-address 10.10.10.1 port 2000

etc..

I cann't telnet to this router with command: telnet 10.10.10.1 2000

I can on my other routers running v7.1

I see there is a new command in v8.1

   sh telephony-service license

Do I need a license file on this router?

We have Cisco 6921 phones at this site that require v8.1

I also have the standard license envolope from Cisco FL-SRST-25=

Has anyone seen this?

Thanks

Matt

3 REPLIES
Cisco Employee

Re: CUCME in SRST v8.1 Port 2000 Phone Not Register on VG

Here's a base config

telephony-service

max-ephones 30

max-dn 60 preference 0

srst mode auto-provision all

srst dn line-mode dual

ip source-address


create cnf

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesrst.html#wp1010721

Let me know if that helps. 6921s are supported in SRST 8.1. That shouldn't be an issue.

Community Member

Re: CUCME in SRST v8.1 Port 2000 Phone Not Register on VG

Not work.

I'm told by Cisco Licensing I need a license on the Router.

Does anyone know how that done?

My license I got in the mail says nothing about it.

FL-SRST-25=

Thanks

Matt

Silver

Re: CUCME in SRST v8.1 Port 2000 Phone Not Register on VG

Matt,

This sounds like it might be related to:

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte08121

At a quick glance it looks like your IOS version might not have the fix for that defect. Can you try the latest T code and see how it goes?

-Jason

322
Views
0
Helpful
3
Replies
CreatePlease to create content