Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCME MoH support for mixed 7940-7960 & 7941-7961

I am using callmanger express 7.0 and am attempting to enable MOH.

I have a combination of 7961, 7940, 7960 handsets. I have used the following configuration:

1. telephony-service

2. moh music-on-hold.au

3. multicast moh 239.10.16.4 port 2123

4. exit

5. ephone x

6. multicast-moh

7. end

The music on hold only works for my 7941/61 handsets. What is the issue/required for the

other handsets i.e 7940-7960 ?

2 ACCEPTED SOLUTIONS

Accepted Solutions
Silver

Re: CUCME MoH support for mixed 7940-7960 & 7941-7961

run the following and initiate a hold:

debug ephone moh

paste the output back here.

bye for now

Ajaz

Silver

Re: CUCME MoH support for mixed 7940-7960 & 7941-7961

In the meantime replace the multicast moh command with this please:

multicast moh 239.1.1.1 port 16384

Let us know the result.

Ajaz

3 REPLIES
Silver

Re: CUCME MoH support for mixed 7940-7960 & 7941-7961

run the following and initiate a hold:

debug ephone moh

paste the output back here.

bye for now

Ajaz

Silver

Re: CUCME MoH support for mixed 7940-7960 & 7941-7961

In the meantime replace the multicast moh command with this please:

multicast moh 239.1.1.1 port 16384

Let us know the result.

Ajaz

New Member

Re: CUCME MoH support for mixed 7940-7960 & 7941-7961

Hi Ajaz,

This works now. Thanks 10/10 !!!!

211
Views
0
Helpful
3
Replies