Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCME Outgoing DTMF from SIP phone to PSTN

Dear all,

2811 Voice router with CME and SIP phone is installed and working.

2 BRI interfaces connects to PSTN (they are no SIP trunk).

When outgoing calls made from SIP Ipphones to an external IVR system, DTMF signals are not sent in order to navigate in voice menu.

The command "dtmf-relay sip-notify" has been applied in "voice register pool" without success.

Please, could you tell me how to configure CME in order to sent outgoing DTMF to PSTN from SIP Phone?

Thanks for your help.

Best regards.

7 REPLIES
Hall of Fame Super Gold

Re: CUCME Outgoing DTMF from SIP phone to PSTN

The easier way is to configiure the sip phone to not use relay.

Note sip phones actually never use sip-notify.

New Member

Re: CUCME Outgoing DTMF from SIP phone to PSTN

Thank you for the suggestion.

But technicaly, how to do that?

Any example will be appreciate.

Best regards

Hall of Fame Super Gold

Re: CUCME Outgoing DTMF from SIP phone to PSTN

In the telephone, configure no DTMF relay.

Same in router.

New Member

pdeck,did it work?! can you

pdeck,

did it work?! can you show how u did it?

New Member

No solution was found.Context

No solution was found.

Context has been changed and CUCME installaton had been removed without resolution. Sorry.

New Member

solution for my problem was

solution for my problem was below:

 

as explained by Paolo

voice register pool  120
 busy-trigger-per-button 2
 id mac xxx.xxxx.xxx
 type 8851
 number 1 dn 120
 cor incoming CALL-NATIONAL default
 dtmf-relay rtp-nte
 username 123123 password 123123
  codec g711ulaw

 

New Member

did you resolve your problem.

did you resolve your problem. and how?

365
Views
0
Helpful
7
Replies