Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUCME - Questions

Hi

How do I get these details on CME router

  • to check if SIP trunk with Nortel is established
  • How many calls where successfully made during last one hour and duration for each call??
  • How much bandwidth does each call takes??
  • what steps are needed to  differentiate the local calls with PSTN calls ( change ringtone ) ; endpoints are sip phones.

thanks

Saquib

3 REPLIES
Hall of Fame Super Gold

Re: CUCME - Questions

- check if it works

- enable CDR logging

- 82 kbps each

- not possible. With sccp phones, is possible.

New Member

Re: CUCME - Questions

Hi,

  • to check if SIP trunk with Nortel is established
    • show sip-ua register status
  • How many calls where successfully made during last one hour and duration for each call??
    • the real-time calls can be shown with show sip-ua calls
  • How much bandwidth does each call takes??
    • with how sip-ua calls you see the codec/bandwidth as well
  • what steps are needed to  differentiate the local calls with PSTN calls ( change ringtone ) ; endpoints are sip phones.

Greets,

Norbert

Hall of Fame Super Gold

Re: CUCME - Questions

show sip-ua register  status

Incorrect, normally SIP trunks between PBXs do not use registration.

176
Views
0
Helpful
3
Replies