Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUCME sdspfarm units always present even if removed

Hi,

I've configured transcoders, mtp and conference for a CUCME.

Now I want to remove them.

But after removing transcoder, conference and mtp profiles in the general configuration,

and disabling sccp and i the telephony-service too.

i still see outputs in the "show sdspfarm units" command :

CUCME2851_1#sh sdspfarm units

mtp-1 Device: TCP socket:[-1]  UNREGISTERED
actual_stream:0 max_stream 0 IP:0.0.0.0  0  Unknown 0 keepalive 0

conf-2 Device: TCP socket:[19]  UNREGISTERED
actual_stream:0 max_stream 0 IP:10.71.4.2  50883  Conference Dixieland keepalive 1877

mtp-3 Device:TXC0026CBF8FA40 TCP socket:[7]  UNREGISTERED
actual_stream:0 max_stream 10 IP:10.71.4.2  55975  MTP Dixieland keepalive 55

conf-4 Device:CFB0026CBF8FA40 TCP socket:[19]  UNREGISTERED
actual_stream:0 max_stream 0 IP:10.71.4.2  11461  Conference Dixieland keepalive 40

max-mtps:0, max-streams:0, alloc-streams:0, act-streams:0
CUCME2851_1#

So how to remove them without reloading the router?

Best regards,

Antra

1 REPLY
Cisco Employee

Re: CUCME sdspfarm units always present even if removed

Can you post the current running configuration of the gateway?

534
Views
0
Helpful
1
Replies
CreatePlease to create content