Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CUE 8.5 with CUCM 8.5

Hello,

we have an issue with our CUE.

Internal calls to the CUE and leaving a voicemail for someone from a internal deskphone works fine. Only external calls will be terminated with a fast busy tone. I couldn’t find much information about CUE interacting with CUCM.

As I remember what I learned the CUE needs a SIP trunk to CUCM. At the moment there is no SIP trunk for CUE configured. But in that case was wondering that internal calls work fine. Any idea what I can check or what I can debug on the CUE?

thanks

Eike

Everyone's tags (3)
3 REPLIES
VIP Super Bronze

CUE 8.5 with CUCM 8.5

Hi,

What tyoe of gateway are you using..is can you send a

debug voip ccapi inout Please send the calling and called number..

Can you also send a sh run of your gateway?

What codec do you have on your inbound dial-peer to the gateway and your outbound dial-peer from the gateway to cucm

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"

Re: CUE 8.5 with CUCM 8.5

Hi,

it is 2821 mgcp gateway.

there is no problem for normal incoming calls. Phone rings and after the NOAN duration it just gives a fast busy. So I guess it is something in call manager and not on the gateway.

I should maybe mention that it was working before, with CUE 3 or 4 (can't remember) and CUCM 7.1

Codec we use is G711

Eike

VIP Super Bronze

CUE 8.5 with CUCM 8.5

can you do a test call and send cucm traces..ensure trace is set to detail

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
287
Views
0
Helpful
3
Replies
CreatePlease login to create content