Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

cue access

Hi,

i have cue where i can access from command line through the router, no password at this stage when login to cue.

i am wondering how to know what is the username and password for the web cue access or at least can i set a new username and password for web access.

Good day

1 ACCEPTED SOLUTION

Accepted Solutions

Re: cue access

The following link should help.

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml

Hope this helps. If so, please rate the post.

Brandon

2 REPLIES

Re: cue access

The following link should help.

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml

Hope this helps. If so, please rate the post.

Brandon

Re: cue access

Look in the configuration under telephony-services in the running config of the router. If gui access has been setup, you will see the statement

"web admin system name [login name] [password | secret] xxxx"

if its not there, you can configure it and this will be the username/pw for gui access to cue.

Hope that helped

147
Views
0
Helpful
2
Replies