Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUE direct transfer to VM with no E164 option

I would like to setup direct transfer to voice mail in CUE.

I'm already using the E164 for DID assigment so that's not an option. Looks like I will have to go with a translation rule my dial plan is 3 digits begining with 1.. and the E164 number begins with 834221....

Can you help with an example.

thanks

Armando

2 REPLIES

Re: CUE direct transfer to VM with no E164 option

Armando,

Another option is to use the custom script which can be obtained by sending an email to ask-cue-editor@external.cisco.com. See the following link for details on the script and its use.

http://www.cisco.com/en/US/customer/products/sw/voicesw/ps5520/products_tech_note09186a00802ab979.shtml

Hope this helps. If so, please rate the post.

Brandon

New Member

Re: CUE direct transfer to VM with no E164 option

i figure it out. 8 plus the 3 digit extension.

voice translation-rule 1

rule 1 /^8\(.*\)/ /\1/

voice translation-profile extra_extn

translate redirect-called 1

dial-peer voice 1 voip

translation-profile outgoing extra_extn

preference 1

destination-pattern 6000

session protocol sipv2

session target ipv4:10.66.81.94

incoming called-number .

dtmf-relay sip-notify

codec g711ulaw

no vad

ephone-dn 6 dual-line

number 81..

call-forward all 6000

Armando

142
Views
5
Helpful
2
Replies
CreatePlease login to create content