Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUE does not recieve inbound CLID

Hello,

I have a few SIP DID's on my CME (7.0, 2821) that are ringing either an extension or hunt group, which goes to CUE after 15 seconds. The message comes in correctly but CLID is never registered by CUE. Normally I should be able to see the inbound CLID of the sender's message in VoiceView but I do not - it's like it's not being passed to the CUE. What am I missing, or is this normal behaviour for incoming SIP calls? I can see sender ID when the message is from an internal extension.

Thanks

5 REPLIES

Re: CUE does not recieve inbound CLID

Hello,

Do you have the command "voicemail callerid" in you CUE config?

New Member

Re: CUE does not recieve inbound CLID

Yes, I do. Good call.

Messages sent from internal SCCP phones do show CLID name and number. Messages from SIP trunks do not.

New Member

Re: CUE does not recieve inbound CLID

One place to check is in the CUE gui.

Go to Voicemail -> VM Configuration

Make sure "Play caller ID for external callers" is enabled.

Hope it helps.

New Member

Re: CUE does not recieve inbound CLID

That did the trick - why it was disabled is beyond me...

Thanks!

Re: CUE does not recieve inbound CLID

Thanks for the nice rating!

168
Views
10
Helpful
5
Replies