01-24-2014 06:45 AM - edited 03-16-2019 09:25 PM
I have a customer that has a custom CUE script that I am trying to edit. Right now the script plays through 3 times and then transfers the caller to the operator. What I am trying to do is change the script so that it only plays through once and then goes to the operator. I am not well versed in working with the CUE Script Editor however I've tried several different things to make this work, none successful. My initial thought was that I needed to change the Timeout portion of the menu to follow the same process as option 0 which transfers to the operator as well. Then I found out that it actually is working like that except that it is playing the script 3 times. I found the maxRetry var set to 3 and changed it to 1 thinking that should fix the issue. That also had no effect on the script function. I did open a case with Cisco but since this is a custom script that isn't supported they told me they couldn't help me. I thought maybe someone here might have some insight or thoughts on this issue. Any suggestions are greatly appreciated as I have about had it with this issue. I will attach the .aef to the post.
Thanks
Rich
Solved! Go to Solution.
01-24-2014 07:13 AM
Hi Richard, in the dial by extension step, set the maximun retries to 0.
Take a look a this same question here:
https://supportforums.cisco.com/message/4139631#4139631
HTH
Gabriel
01-24-2014 07:13 AM
Hi Richard, in the dial by extension step, set the maximun retries to 0.
Take a look a this same question here:
https://supportforums.cisco.com/message/4139631#4139631
HTH
Gabriel
01-24-2014 12:26 PM
That worked great! Thanks so much for the help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: