Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CUE without CME

I have 2911 router serves as a SRST GW in a branch. 30 IP phones in the location are connected to a call manager in main branch via H.323.

Need to setup an auto attendant/IVR functionality for the branch. PSTN lines are terminated in the 2911 router. Is it possible to setup CUE in the same 2911 without installing CME?

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Red

CUE without CME

Hi Mohamed,

Yes, this would be a supported configuration Can you please review the steps in this excellent doc;

CallManager for Cisco Unity Express Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

4 REPLIES
Hall of Fame Super Red

CUE without CME

Hi Mohamed,

Yes, this would be a supported configuration Can you please review the steps in this excellent doc;

CallManager for Cisco Unity Express Configuration Example

http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a0080289ef0.shtml

Cheers!

Rob

Please remember to tag your threads and help support "Teachers without Borders"

https://supportforums.cisco.com/community/netpro/idea-center/communityhelpingcommunity

CUE without CME

Hi Rob,

Thanks for the doc. Is it possible to enable GUI for the cue as it makes easy to create custom scripts for AA or IVR.

Cheers...

Hall of Fame Super Red

CUE without CME

Hi Mohamed,

Yes, you will certainly be able to set up the CUE GUI in this config

Cheers!

Rob

CUE without CME

Thanks Rob,

I was able to setup the CUE in a SRST router and also GUI functionality works fine. Instead of JTAPI & CTI ports i use SIP dial peer in SRST router pointing to the CUE and plays the AA and again forwarding to CUCM via voip dial-peer...

Thanks & Regards,

M.Mohamed Raffiudeen...

435
Views
0
Helpful
4
Replies
CreatePlease login to create content