Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUE7 - stops at boot-loader when reload

Hi,

when reload the CUE module always stop at boot-loader but able to loading via "boot disk" command and works fine.

why CUE module always stop at boot-loader and any way to continut the booting? Is there similar concept to Router's "Configuration register is 0x2102"?

Advise please,

4 REPLIES
Bronze

Re: CUE7 - stops at boot-loader when reload

What is the version of CUE running on this module? Is this NM, AIM or NME module?

Hall of Fame Super Gold

Re: CUE7 - stops at boot-loader when reload

Everything is configure at the boot loader, type help to see what the commands and settings are.

New Member

Re: CUE7 - stops at boot-loader when reload

The "default boot" field was blank and that's why always stop in boot-loader. Works okay after enter "disk" on the field.

Hall of Fame Super Gold

Re: CUE7 - stops at boot-loader when reload

Very good, please remember to rate useful posts with the scrollbox below.

185
Views
0
Helpful
4
Replies