I have 2 CUPC users. When 1 of them updates the contact list it happens immediately. When the other one does it, they have to logout/login. If I login on a different PC, then problem still happens so appears to follow the CUPC user. I can't see any difference in their settings on CUPS or CUCM. Any ideas what this might be?
â¢ If the contact is internal to the corporate network, the UserID attribute in the LDAP Attribute Mapping table might be incorrectly configured in Cisco Unified Presence Administration (Application > Cisco Unified Personal Communicator > Settings). For details about how to configure the Cisco Unified Presence LDAP settings
Make sure that the contact to be added is in the Cisco Unified Communications Manager database and the Cisco Unified Presence database.
â¢ If the contact is in a federated domain, make sure that you properly configured the integration. For details about how to integrate and configure Cisco Unified Presence with Microsoft LCS/OCS.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...