Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cups 6

I am using cups 6.02 with cvp 4 and cm 5.1. I read a couple different guides where it indicates that if you have more than one cups server they must be in the same subnet and you cannot use them across the wan. DO they have to be in the same subnet when you have two cups server? I have one cluster distributed with a subscriber in another part of the country that is why the concern

Hall of Fame Super Silver

Re: Cups 6

According to SRND clustering CUPS over WAN is not supported, both servers have to be co-located with the CM Pub:

Cisco Unified Presence Deployment Models

Cisco Unified Presence is supported with the following Unified CM deployment models:

single-site centralized call processing, multisite centralized call processing, and multisite distributed call processing.

However, both the Cisco Unified Presence publisher and subscriber must be co-located with the Unified CM publisher. The Cisco Unified Presence cluster is not supported in Unified CM deployments with clustering over the WAN.



New Member

Re: Cups 6

I'm sorry but I don't understand what 'co-located' means exactly. On the same switch? No routing have to be done between the three servers?



New Member

Re: Cups 6

what the issue is Cupps bing in the same subnet an in the sam physical location.

Cups 6 does not support this configuration.

The next release of cups will.