You will need to provide CUPS server MAC address as it a license will be issues for the SIP Proxy and Presence on the CUPS. But you will not need a user license separately for CUPS as you will enable license capabilities for CUPS/CUPS on callmanager web page and then users will be synced to CUPS.
By default neither of these are checked; however, each box that is checked takes one unit from the Device License Pool. Therefore, if both boxes are checked, you are correct that it will consume 2 DLUs. On the Presence Server itself there is only the license for the proxy server and presence engine functionality. All user licensing and capability assignment is done from CUCM only.
So CUPS SW feature license will be issued to CUPS Mac address and user license (DLU) will be issued to callmanager Publisher MAC address.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...