Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

CUWL - Adding additional CUCM node

Hi,

I just installed CUWL license on my Publisher version 6.1 CUCM Server. The CCM node count (as you would expect is 1)

I will be adding a second CUCM.

Does anybody know what the procedure is for obtaining a second node license?

5 REPLIES
Cisco Employee

Re: CUWL - Adding additional CUCM node

simply ask for a node license and provide the MAC address from the licensing server, usually the PUB takes this role

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CUWL - Adding additional CUCM node

Thanks Java,

I installed the 2nd node license. However I get following error message during 2nd node installation:

'Configuration validation with ukshqpub01 (10.15.28.10) failed.

Configured first node ukshqpub01 is not a First Node.

Name of the Publisher node is ukshqpub01 - I configured the second node manually on

ukshqpub01 (system>server the added the second node).

I have verified IP connectivity between the Publisher and the second node).

I have also restarted CCM service on Publisher and rebooted Publisher but I still get the same issue.

I've attached screenshots from the License Unit pages. It seems (to me from these screenshots) that the issue may be down to licencing?

Do you have screenshots for a succesfull second node install that I can compare with?

Thanks for your help so far!

Cisco Employee

Re: CUWL - Adding additional CUCM node

no, i don't take screenshots from my installations.

have you already added the 2nd server under CUCM admin as per the guides???

BTW, no screenshots are attached to your reply

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: CUWL - Adding additional CUCM node

Hi java,

I've got a TAC case open. TAC Engineer thinks it is a known issue. Just sent him log files

Have you carried out 6.1.2 install with 2 or more nodes?

Cisco Employee

Re: CUWL - Adding additional CUCM node

yes, just the same as any 5.x or 6.1(1) installs

actually you don't even need the license to perform the install, license is needed when you try to activate the CCM process.

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
733
Views
5
Helpful
5
Replies