We have CUCM 8.x cluster & Unity Connection 8.6 cluster.Recently we purchased 300 CUWL standard license covering both CUCM and CUC . I used the provided PAK(along with CUCM server MAC) to generate CUCM license. Now how can I use the same PAK to generate Unity Connection voicemail box license as the 300 CUWL Standard we purchased covers for both the systems?
I tried using the same PAK on Cisco site but got error saying the PAK is already used..
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...