Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Cyberdata VOIP Loudspeaker Amplifier

UCM 7.1

Cyberdata VOIP Loudspeaker Amp

I have gotten this to register and work but what I am running into is the ability for this device to stay registered. I looked at the manufactures website that talks about this same issue but I am not sure what timer in the Service parameters that this is exactly referring to. Link makes mention of a re-registration time value but not sure what exactly of this parameter.

http://www.cyberdata.net/products/voip/digitalanalog/loudspkramp/index.html#Q19

3 REPLIES

Re: Cyberdata VOIP Loudspeaker Amplifier

Can you be more specific about exactly how this is registering, protocols, devices, etc?

-nick

Re: Cyberdata VOIP Loudspeaker Amplifier

Sure,

This the guide that I used for both sides.

http://tinyurl.com/nsgxt2

Essentially though, I added a third-party SIP device (basic) and then created a user and associated the user to SIP device.

On the cyberdata side, it was just pointing the device to UCM and putting the credentials in from the user that i created.

Seems pretty simple right?? It just wont stay registered. It does work when it is registered though.

New Member

Re: Cyberdata VOIP Loudspeaker Amplifier

Did you ever get this resolved?

275
Views
0
Helpful
3
Replies