12-22-2009 08:18 AM - edited 03-15-2019 08:51 PM
My ISP says the router is 'blocking out the D Channel'
I am using an MGCP gateway backhauling the ISDN to Call Manager - I am seeing 'path code violations'
yet when the telco puts a loop in the line, it tests clear.
They insist is it the CSU (customer service unit - ie the router!)
I am really stumped here... any ideas ??
Bascially I have 'Layer 1 - Deactivated / Shutdown' with multiple path code violations
Solved! Go to Solution.
12-26-2009 12:44 PM
This is a definately a Telco related problem.
However to rule out any options from your side you can try configuring it with H323
because D channel is backhauled with call manager in case of MGCP to verify that it is not a call manager issue
you try that with h323 and also make sure we are on the latest IOS on the gateway.
HTH
Vivek
12-26-2009 12:44 PM
This is a definately a Telco related problem.
However to rule out any options from your side you can try configuring it with H323
because D channel is backhauled with call manager in case of MGCP to verify that it is not a call manager issue
you try that with h323 and also make sure we are on the latest IOS on the gateway.
HTH
Vivek
12-30-2009 01:22 AM
I help test H323 - I ACL blocked all communication to Call Manager - triggering SRST - and the fault was still there
The Telco eventually admitted the problem yesterday.
Thanks for your help
12-26-2009 05:36 PM
Please send "show controllers T1"
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: