Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

dail-peer not working

Dial peer 14 is not working:

http://pastebin.ca/1281736

debug voice dialpeer inout:

Dec 10 16:30:47.846: //-1/BC172FC2B698/DPM/dpAssociateIncomingPeerCore:

Result=Success(0) after DP_MATCH_INCOMING_DNIS; Incoming Dial-peer=103

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

Calling Number=, Called Number=2142346837, Peer Info Type=DIALPEER_INFO_SPEECH

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=2142346837

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersCore:

No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

Dec 10 16:30:47.850: //-1/BC172FC2B698/DPM/dpMatchPeersMoreArg:

Result=NO_MATCH(-1)

1 ACCEPTED SOLUTION

Accepted Solutions

Re: dail-peer not working

Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?

What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.

Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?

Hope this helps

Allan.

2 REPLIES

Re: dail-peer not working

Hi Shaun, when you show dial-peer voice summary, what is the status of the dial-peer 114? Up or Down?

What I have noticed is that the trunk group label that you have assigned does not have any active voice-ports. Therefore I suspect that it is down.

Should the trunkgroup label be 'trunkgroup Local' and NOT 'trunkgroup local'?

Hope this helps

Allan.

New Member

Re: dail-peer not working

Im an idiot, thanks for your help.

local should have been Local. It is case sensitive.

You were right.

123
Views
0
Helpful
2
Replies