Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

dail-peer with MGCP

hi guys ,

do i need to configure the dial peer for voice ports or endpoint on the router if im using MGCP or it will be created automatically when the router download config from the CCM? . by the way i have not seen dail- peer after successfull config download on running config. for E1 ISDN, FXO , FXS

3 REPLIES
Cisco Employee

Re: dail-peer with MGCP

do you have configured the ccm-manager config server??

if not that's why the config is not being sent

if not, you can configure them manually adding the application mgcpapp for those dial-peers

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: dail-peer with MGCP

well yes i configured the ccm-manager config server and already downloaded the config and the gateway registred and the endpoint as well. but i dont see dail-peer configurtion. why do i need dial-peer in mgcp? ALREADY UNDER VOICE PORTS APPLICATION Mgcp. IS THERE DIFFERRENCE CONIFG FOR DIAL-PEER BETWEEN ANALOG fxO AND e1 isdn

Cisco Employee

Re: dail-peer with MGCP

the basic difference is the port to which you refer when configuring the dial peer

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
116
Views
0
Helpful
3
Replies