Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DASS -> ISDN30

Hi,

We are upgrading an old index PBX to Call Manager 6. The index PBX currently has circuits from 3 telco (BT, COLT, C&W) all 3 present these circuits as DASS. In order to move these over to an IOS gateway i understand we need to migrate from DASS. BT tell us that they will convert DASS to ISDN30 for us, will our gateways (2811 with VWIC2-1MFT-T1/E1) will this support ISDN30?

Regards

2 REPLIES
Hall of Fame Super Gold

Re: DASS -> ISDN30

Yes. Note you also need a minimum of a PVDM2-32 to support a full ISDN30 circuit.

You can check what you have in the router with "show diag".

Please rate post if it does!

Silver

Re: DASS -> ISDN30

also bear in mind that with Euro ISDN at least with Colt you will lose the leading digit zero so you may need to re-insert again otherwise the CLI will look odd

583
Views
5
Helpful
2
Replies