I have a customer who wants to upgrade from CallManager 3.3(5) to 6.1.
As part of the upgrade we will be replacing the MCS servers as they are a few years old.
Obviously we cannot go directly from 3.3(5) to 6.1 so I am planning to install 3.3(5) on the new servers, copy the data from the old system using BARS and then upgrade to 4.2(3).
I will then use Data Migration Assistant to go from 4.2(3) to 6.1.
My question concerns Data Migration Assistant. Does it only generate Device License Units for devices that are actually registered to the 4.2(3) server as opposed to being defined in the database but not registered?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...