Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Database Read and Write on Subscriber?!

Hello

I encountered a strange thing for me...

I saw with the DBL Helper, that all Databases are Raed/Write?!?!

Is that really true or do I have a problem? I was sure that only the Publisher Database is Read/Write and the Subscriber has just a Read Database!!

Thank you for any reports about your experience.

Regards,

Pascal

1 REPLY
Hall of Fame Super Red

Re: Database Read and Write on Subscriber?!

Hi Pascal,

The configuration database is stored on a publisher server, and a read-only copy is replicated to the subscriber members of the cluster. Changes made on the publisher are communicated to the subscriber databases, ensuring that the configuration is consistent across the members of the cluster, as well as facilitating spatial redundancy of the database.

The publisher server is the only server that has read and write access to the configuration database. When configuration changes are made, other members of the cluster have a read-only copy of the database.

From this CCM SRND;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42clproc.html

This changes with the release of CCM 6.x;

In prior versions of Cisco Unified Communications Manager, subscriber servers in the cluster use the publisher database for READ/WRITE access, and only use the local database for READ access when the publisher database cannot be reached. With Cisco Unified Communications Manager Release 6.0, subscriber servers in the cluster READ the local database. DB WRITES happens in both the local database as well as the publisher database, depending on the type of data. DBMS (IDS) replication is used to synchronize the databases on the nodes of the cluster. When recovering from a failover conditions such as loss of WAN connectivity for extended period of time, the Cisco Unified Communications Manager databases need to be synchronized with any changes that may have been made during the outage. This process happens automatically when database connectivity gets restored. This process may take longer over low bandwidth and/or higher delay links.

Database modifications for CallProcessing

User Facing features can be made on subscribers. These include updates for:

Call Forward All (CFA)

Message Waiting Indication (MWI)

Privacy Enable/Disable

Do Not Disturb Enable/Disable (DND)

Extension Mobility Login (EM)

Monitor (for future use, currently no updates at the user level)

Hunt Group Logout

Device Mobility

CTI CAPF status for end users and application users

Credential hacking and authentication

Hope this helps!

Rob

184
Views
0
Helpful
1
Replies