Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

DB replication issue.

Hi,

I'm using call manager version 6.1.3 and I had 3 servers in the cluster(pub, sub1, sub2). I removed one server physically(sub2) . but didn't remove from server configuration window in publisher. now the replication status is 3 in all servers. so with out removing the server (subscriber) can make the replication good for other two servers (pub, sub2). or only removing sub1 from server config window is the only option.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

DB replication issue.

In CUCM 6.x  servers could show state 3 if one server is down in the cluster. This can happen because the other servers are unsure if there is an update to a user facing feature that has not been passed from that sub to the other device in the

cluster.

So it is safe to suggest that replication between your remaining two servers is fine. There is no way you can make the state display a status of 2 when one of the servers in the cluster is down. Like you said the only way will be to remove it from the cluster

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
1 REPLY
VIP Super Bronze

DB replication issue.

In CUCM 6.x  servers could show state 3 if one server is down in the cluster. This can happen because the other servers are unsure if there is an update to a user facing feature that has not been passed from that sub to the other device in the

cluster.

So it is safe to suggest that replication between your remaining two servers is fine. There is no way you can make the state display a status of 2 when one of the servers in the cluster is down. Like you said the only way will be to remove it from the cluster

Please rate all useful posts

"'Nature is too thin a screen, the glory of the omnipresent God bursts through it everywhere"-Ralph Waldo Emerson

Please rate all useful posts "The essence of christianity is not the enthronement but the obliteration of self --William Barclay"
134
Views
0
Helpful
1
Replies