Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DDI on CCME

Hi team

How Can I configure DDI for CCME

My DDI Range 2303320-29

and me Phone Number 501 -509

Brgds

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: DDI on CCME

A nitpick: your DP 300 doesn't need port. port is never used for incoming DP.

Please remember to rate useful posts with the scrollbox below.

5 REPLIES

Re: DDI on CCME

hi there

just make incoing translation profile and apply it to your pots dial-peer

this one take only las three digits

and on each ephon-dn

creat a number with a secondary number

for eaxmple lets say call coming to last three digits 320 should go to extention 501

ephone-dn 1 dual-line

number 501 secondary 320

good luck

if helps Rate

Hall of Fame Super Gold

Re: DDI on CCME

There are two methods, dialplan-pattern and translation rules. I recommend the second especially if you have CUE.

voice translation-profile makedid

translate called 10

voice translation-rule 10

rule 1 /230332/ /50/

voice-port x/y/z

translate incoming makedid

New Member

Re: DDI on CCME

Dear All

Problem solved

I add

voice translation-rule 506

rule 1 /21/ /501/

rule 2 /22/ /502/

rule 3 /23/ /503/

rule 5 /25/ /505/

voice translation-profile 506

translate called 506

voice-port 0/3/0

translation-profile incoming 506

dial-peer voice 3300 pots

translation-profile incoming 506

incoming called-number .

direct-inward-dial

port 0/3/0

Hall of Fame Super Gold

Re: DDI on CCME

A nitpick: your DP 300 doesn't need port. port is never used for incoming DP.

Please remember to rate useful posts with the scrollbox below.

New Member

Re: DDI on CCME

Great

Thank for yoy advice p.bevilac

Brgds

142
Views
0
Helpful
5
Replies
CreatePlease to create content