07-01-2010 01:45 PM - edited 03-15-2019 11:31 PM
is there an equivalent command for testing voice E1's as debugh isdn q931for PRI's?
07-01-2010 01:57 PM
Hi
Yes there is - it's 'debug isdn q931'
:-)
Aaron
Please rate helpful posts...
07-01-2010 04:28 PM
If you mean E1 R2 (CAS), that is "debug vpm signal".
07-02-2010 06:47 AM
To tell you the truth I am not really sure what kind of E1 it is. The only configuration in the router is this.
controller E1 0/0/0
framing NO-CRC4
ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-compelled ani
This is my first time working with an E1 so thanks for any help.
07-02-2010 08:23 AM
Hi,
Then you have E1 R2. You can read about E1 R2 configuration and troubleshooting from here:
At the bottom of the doc, you'll find more interesting documentation.
Hope it helps, please rate if it helps.
Kind regards,
- Adrian.
07-20-2010 06:28 AM
hmm I can't seem to access that link i get a forbidden File or Application worning.
07-20-2010 08:11 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: