Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

debug isdn q931 equivalent for voice E1

is there an equivalent command for testing voice E1's as debugh isdn q931for PRI's?

6 REPLIES
Super Bronze

Re: debug isdn q931 equivalent for voice E1

Hi

Yes there is - it's 'debug isdn q931'

:-)

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Hall of Fame Super Gold

Re: debug isdn q931 equivalent for voice E1

If you mean E1 R2 (CAS), that is "debug vpm signal".

New Member

Re: debug isdn q931 equivalent for voice E1

To tell you the truth I am not really sure what kind of E1 it is. The only configuration in the router is this.

controller E1 0/0/0

framing NO-CRC4

ds0-group 1 timeslots 1-15,17-31 type r2-digital r2-compelled ani

This is my first time working with an E1 so thanks for any help.

Re: debug isdn q931 equivalent for voice E1

Hi,

Then you have E1 R2. You can read about E1 R2 configuration and troubleshooting from here:

http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_configuration_example09186a00800ad389.shtml

At the bottom of the doc, you'll find more interesting documentation.

Hope it helps, please rate if it helps.

Kind regards,

- Adrian.

New Member

Re: debug isdn q931 equivalent for voice E1

hmm I can't seem to access that link i get a forbidden File or Application worning.

Re: debug isdn q931 equivalent for voice E1

Here is in PDF.

Kind regards,

- Adrian.

1023
Views
0
Helpful
6
Replies