Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

debug translation

Can someone give me any insight as to what may be causing calls not to go through. I posted a snippet of a debug. Thanks.

=======================================

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallCanGateway:

CALL_ERROR_INFORMATIONAL; Gateway Is Not Allowed;

Incoming InterfaceType=1, Outgoing Interface Type=28, Call Id=0x4B

*Jun 26 17:18:23.515: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

*Jun 26 17:18:23.515: : updating existing feature vsa

*Jun 26 17:18:23.515: //-1/xxxxxxxxxxxx/CCAPI/cc_update_feature_vsa:

*Jun 26 17:18:23.515: feature call basic

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Start Calling Accounting;

Call Entry(Incoming=TRUE)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Call Entry(Disconnect Cause=0)

*Jun 26 17:18:23.515: //75/00CC1EB05B01/CCAPI/ccCallDisconnect:

Cause Value=3, Call Entry(Responsed=TRUE, Cause Value=3)

2 REPLIES

Re: debug translation

I need the entire debug voip ccapi inout and the whole config. also if its a pri debug isdn q931

Thanks!

Chad

Cisco Employee

Re: debug translation

that cause is

No route to destination

it's all i can tell from your post

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
358
Views
0
Helpful
2
Replies